Plain Woven Ultra Fine Stainless Steel Wire Silk Screen Printing Mesh
1. Stainless Steel Printing Mesh Description
Stainless Steel Wire Silk Screen Printing Mesh uses a wire imported from Japan, which has 2 times higher tensile strength compared to the common domestic wires and an extremely low elongation rate of 3-5%. This screen printing mesh shows extraordinary performance in printing that requires fine patterns and dimensional accuracy.
2. Stainless Steel Printing Mesh Features
· High tension: Much higher tension than common polyester mesh and smooth tension;
· Super precision: Uniform wire diameter and aperture with an extremely low difference;
· Low elongation: Very small elongation of wire mesh at high tension;
· High stability: The wire mesh will not lose elasticity at extreme tension;
· High corrosion resistance: The excellent corrosion resistance of stainless steel wire exceeds polyester fiber;
· Non-electrostatic: To avoid the effects of non-electrostatic for print and ensure the safety of printing;
· Good heat-melting resistance: Special features of stainless wire mesh. Suitable for heat-melting ink;
· Good solvent resistance: To avoid the effects of any solvents to wire mesh and to ensure the safety of the print screen.
3. Stainless Steel Printing Mesh Specification
| Specification | Mesh/
inch | Wire Dia
(μm) | Open area
Ratio(%) | Apereture
(μm) | Apereture
(μm) | Calendered Thickness
(μm) | Theoretical
lnk(cm^/m^) |
| 40*40*160 | 40 | 160 | 56 | 475 | 300-320 | As order | 179.1 |
| 60*60*120 | 60 | 120 | 51.3 | 303 | 230-245 | As order | 123.2 |
| 80*80*120 | 80 | 120 | 39 | 198 | 235-245 | As order | 92.9 |
| 80*80*90 | 80 | 90 | 52 | 228 | 175-180 | As order | 103 |
| 80*8*50 | 80 | 50 | 71 | 268 | 95-100 | As order | 78 |
| 100*100*100 | 100 | 100 | 36.8 | 154 | 195-205 | As order | 77.2 |
| 120*120*80 | 120 | 80 | 39 | 132 | 155-165 | As order | 65.8 |
| 150*150*60 | 150 | 60 | 41.7 | 109 | 115-124 | As order | 50 |
| 165*165*35 | 165 | 35 | 60 | 119 | 70-75 | As order | 48 |
| 165*165*45 | 165 | 45 | 50.1 | 109 | 88-93 | As order | 45.1 |
| 165*165*50 | 165 | 50 | 45.6 | 104 | 97-105 | As order | 45.6 |
| 180*180*45 | 180 | 45 | 46.4 | 96 | 88-93 | As order | 41.5 |
| 180*180*50 | 180 | 50 | 42 | 91 | 98-104 | As order | 41.7 |
| 200*200*40 | 200 | 40 | 46.9 | 87 | 82-84 | As order | 43 |
| 200*200*50 | 200 | 50 | 37 | 77 | 98-103 | As order | 42 |
| 230*230*35 | 230 | 35 | 46.7 | 75 | 72-76 | 50-67 | 37 |
| 250*250*40 | 250 | 40 | 36.8 | 62 | 82-86 | 50-80 | 34 |
| 250*250*30 | 250 | 30 | 49.7 | 72 | 64-68 | 40-58 | 30 |
| 250*250*35 | 250 | 35 | 43 | 67 | 76-78 | 57-70 | 32 |
| 325*325*30 | 325 | 30 | 38 | 48 | 66-68 | 45-60 | 24 |
| 325*325*23 | 325 | 23 | 49.8 | 55 | 49-53 | 37-41 | 25.4 |
| 350*350*35 | 350 | 25 | 43 | 48 | 52-54 | 41-50 | 18.7 |
| 400*400*23 | 400 | 23 | 40.7 | 41 | 50-54 | 35-48 | 19 |
| 400*400*18 | 400 | 18 | 51.3 | 46 | 36-40 | 28-30 | 20 |
| 500*500*18 | 500 | 18 | 41.7 | 33 | 36-40 | 23-29 | 15.3 |
4. Stainless Steel Printing Mesh Application
Stainless steel screen printing mesh is widely used for screen printing in screen printing in the Printed circuit board, Solar Battery, Liquid Crystal Display, Chip Electrical Components, Flat Panel Display, Glass industries. Stainless steel screen printing mesh is widely used for screen printing in screen printing in the Printed circuit board, Solar Battery, Liquid Crystal Display, Chip Electrical Components, Flat Panel Display, Glass industries.
· Printed circuit boards;
· Multilayers;
· Thick film;
· Soldering pastes for SMT;
· Keypads;
· Glass printing;
· Ceramic printing;
Product Tags:
|
|
Ultra Fine Stainless Steel Mesh , Corrosion Resistant Silk Screen Printing Mesh Images
|
